hose 1200

SNOW HOSE™ 1200 series
The only hose designed specifically to meet your unique and demanding requirements. Its double jacket 800 PSIG (5600 kPa) test all polyester hose offers the highest operating safety margin available on the market today. It's Day-Glo yellow color enhances visibility under all climatic conditions. Half the weight of conventional snowmaking hoses, this hose remains flexible under extreme low-temperature.

	Construction:	Circular woven, double jacket 100% virgin spun polyester.
	Tube:	Extruded elastomer - Ozone, age and chemical resistant.
	Length:	50' to 100' (15,2 to 30,5 m)
	Jacket treatment:	ENCAP™ encapsulation ( yellow).

How to specify SNOW HOSE™ 1200 series

The hose shall be of double jacket construction with 100% virgin spun polyester yarn in both jackets. There shall also be a minimum of 10.0 filler yarns per inch in both the inner and outer jackets.

The thickness of the lining shall be 0.020" (50.8 mm) minimum and it shall be constructed of extruded T.P.U. elastomer.

The outside jacket shall be treated with yellow ENCAP™ elastomer, which shall completely encapsulate the jacket fibers and not merely surface coat the jacket.

The hose service temperature range shall be -60°F to 140°F (-51°C to 60°C).

F.M. abrasion test of 30,000 cycles minimum and Taber abrasion test of 5,000 cycles minimum.

At 800 PSIG (5600 kPa), its elongation shall not exceed 8% of the initial hose length; it shall not warp more than 20" (51 cm) and should not rise from the test table.

The hose shall not twist more than 1 ½ turns per 50' (15,2 m) while at 800 PSIG (5600 kPa).

Minimum service test pressure of 400 PSIG (2800 kPa).

Minimum proof test pressure of 800 PSIG (5600 kPa).

The hose while curved to a radius of 27" (69 cm) shall not burst at less than 1600 PSIG (11200 kPa).

Meets or exceeds NFPA 1961 and UL-19 specifications.

SNOW HOSE™ 1200 series PHYSICAL PROPERTIES

Hose
size Spec
Number Coupling
bowl size Weight / 50'
(15,2 m)
uncoupled Coil dia. / 50'
(15,2 m) Minimum kink
burst test pressure

1 1/2"
(38 mm) 10015 1 15/16"
(49,2 mm) 10.5 lbs
(4,8 kg) 15"
(38 cm) 600 PSIG
(4200 kPa)

2"
(51 mm) 10020 2 5/16"
(58,7 mm) 14.0 lbs
(6,4 kg) 15 1/2"
(39 cm) 600 PSIG
(4200 kPa)

Contact us at:

P.O. Box 898

Manchester, CT 06045 - USA

Phone: 860.432.0248

Fax: 860.432.0324

	The hose shall be of double jacket construction with 100% virgin spun polyester yarn in both jackets. There shall also be a minimum of 10.0 filler yarns per inch in both the inner and outer jackets.
	The thickness of the lining shall be 0.020" (50.8 mm) minimum and it shall be constructed of extruded T.P.U. elastomer.
	The outside jacket shall be treated with yellow ENCAP™ elastomer, which shall completely encapsulate the jacket fibers and not merely surface coat the jacket.
	The hose service temperature range shall be -60°F to 140°F (-51°C to 60°C).
	F.M. abrasion test of 30,000 cycles minimum and Taber abrasion test of 5,000 cycles minimum.
	At 800 PSIG (5600 kPa), its elongation shall not exceed 8% of the initial hose length; it shall not warp more than 20" (51 cm) and should not rise from the test table.
	The hose shall not twist more than 1 ½ turns per 50' (15,2 m) while at 800 PSIG (5600 kPa).
	Minimum service test pressure of 400 PSIG (2800 kPa).
	Minimum proof test pressure of 800 PSIG (5600 kPa).
	The hose while curved to a radius of 27" (69 cm) shall not burst at less than 1600 PSIG (11200 kPa).
	Meets or exceeds NFPA 1961 and UL-19 specifications.

Hose size	Spec Number	Coupling bowl size	Weight / 50' (15,2 m) uncoupled	Coil dia. / 50' (15,2 m)	Minimum kink burst test pressure
1 1/2" (38 mm)	10015	1 15/16" (49,2 mm)	10.5 lbs (4,8 kg)	15" (38 cm)	600 PSIG (4200 kPa)
2" (51 mm)	10020	2 5/16" (58,7 mm)	14.0 lbs (6,4 kg)	15 1/2" (39 cm)	600 PSIG (4200 kPa)