For Atomizer Nozzle Protection Remove sand, silt and pipe scale. Eliminates excessive downtime/maintenance routines. For Heat Exchanger Protection Eliminate excessive fouling and plugging common in compressor heat exchangers. Save time, save energy and increase snowmaking efficiencies. For Pump Protection Eliminate excessive wear in secondary booster pumps, by removing sand, silt and pipe scale, pump life will be increased. For Pump Seal Protection Keep troublesome solids away from pump seals and eliminate frequent repairs & replacement costs. Important Application Details Flow must be constant. Flow rate must stay within the separator's "engineered flow window", when performing properly the separator will have a 5-12 psi pressure drop. Pressure must be a minimum of 15 PSI at inlet. Solids must be purged on a regular basis, always include an automated purge valve system.