Compact pleated element panels provide maximum area and dirt holding capacity
	Low pressure drop, iow energy costs
	PFS Series: Positive sealing services
	PFD Series: Two stage design with positive sealing services
	Rugged all-weather steel housing
	Reduction of air and compressor noise
	Safety screen design allows panel element replacement without interruption of equipment operation
	Modified and custom designs available
	Easy, low maintenance cost effective design

	For efficient removal of dust, dirt, and other airborne contaminants from high flow inlet air steams
	PFS Series: Filtration of 98% of 15 micron solid contaminants
	PFD Series: Filtration of 99.97% of 2 micron solid contaminants
	To provide dust-free air to centrifugal fans, compressors, blowers, and turbines
	For indoor or outdoor service
	For continuous or intermittent service
	For silencing of objectionable air intake noise on compressors, blowers, etc.
	Ideal for satisfying original equipment manufacturer’s specifications.

All models are constructed from carbon steel or stainless steel. They are furnished with weatherhoods and rugged welded steel construction for strength and protection from rain or snow. Units may be remotely piped and roof mounted, or directly mounted to the air intake connection of the machinery. A low profile design provides an attractive appearance in outdoor installations.

Long life and durability are featured in this economical housing design. All carbon steel surfaces are primer coated, followed with a final finish of blue enamel. The standard internal steel inlet guard prevents small foreign objects from entering the exposed air intake passage when servicing or replacing panel elements. Gauge taps are provided as standard on each housing. Each panel opening is fitted with a long life resilient seal gasket to prevent by-pass of any un­filtered air. Lifting lugs are provided for ease in initial installation.

Where desired, each housing style may also be modified or customized to meet special application needs. Special options and accessories are available including differential pressure gauges or indicators, internal noise silencing, modified connection sizes and styles, and zinc rich surface coating.

The PFS and PFD Series filter elements offer cleanable and replaceable panels that utilize a pleated media design. Each element offers maximum filter area in a compact assembly. Rugged metal frames and wire mesh guard on each element face ensure long life and withstand rough handling and moisture. Low pressure drop, large dirt holding capacity and high efficiency filtration are assured in the design of Consler Filtration Products panel filter elements.

The standard PFS Series elements are furnished with synthetic filter media that provides 98% retention efficiency on 15 micron solid particles, and 90% retention of 8 micron particles.

The PFD Series uses two separate stages of panel filter elements. This two stage panel element design provides critically clean air with low pressure loss and high efficiency. The Primary Stage panel element incorporates a synthetic pleated media capable of providing 98% retention efficiency on 15 micron particles and 90% retention of 8 micron particles. The Second Stage panel elements also incorporate an extended surface area design. Corrugated aluminum spaces between each accordion pleat of the micro-glass medium ensure high dirt holding capacities and low pressure drops at flows to 2500 CFM per panel. Each Second Stage panel element provides an efficiency of 99.97% retention of 2 micron particles. Positive seal gaskets on each element face prevents by-pass of unfiltered air at each stage.

No special tools are required to replace or service Consler’s panel filter elements. A hand strap on each element allows fast and simple change-out without interrupting equipment operation. After extended use these panels can be vacuum cleaned or flushed with water or a mild cleaning solution.